Fresnel Solar Stirling Engine Sun Power Alternative Energy Stirling Motor Generator
http://www.greenpowerscienc…
THIS ONE MANY THAT INSPIRATION SOLAR HYBRID.
Stirling Power Stirling Generator", url: "http://www.use-sunshine.com/63/fresnel-solar-stirling-engine-sun-power-alternative-energy-stirling-motor-generator/" });
Tagged with: Alternative • Energy • Engine • Fresnel • Generator • Motor • Power • Solar • Stirling
Filed under: Alternative Energy
Like this post? Subscribe to my RSS feed and get loads more!




i could use my death ray to power this
well i must say that you randomly responded without even loking at the vid O_oanyways very nice vid im making a similar engine but its for a school project this helped me a lot
can you do a video explianing how exactly those work
namely the rotation of the drive axle, the inertia from that compresses the cylinder keeping the system going, stopping that cylinder stops the process. though i think thats true of all engines…as for torque, the power of the engine depends on the difference between the hot cylinder and the cold cylinder (or the hot part and the cold part) so the colder the cold part and the hotter the hot part the more energy and the more subsequent torque. your heat sink was hot enough to boil water..
i do wish you would make more practical engines. use a bigger cylinder, have a better coolant system, and please stop using huge lenses for small engines, if you cant do the work with a proportional lens then scaling becomes an issue, if you actually NEED a lens which is 10x the size of the engine you have problems with your design.if you use a better cooling system (such as cold water or something) you will get better power, but torque can be an issue, it depends on its motions to keep moving.
what do you do about over heating
I’m with you on that last comment ???? Do you make these Fresnel lenses and parabolic mirrors? you can make a pretty good v low power generator out of an old computer HD. A couple of these would be just the thing to demonstrate a few of your ideas.
its called a stirring motor not a sternling motor you idiot. i stir my coffee by hand.
???
well, most of these videos show models that CAN’T power anything, they are for display only, that size of model right there, at full speed can be stopped by one finger on the flywheel. Mine doesn’t have enough torque to produce the 1.5 volts required to light one LED. the smallest generator I could find to attach to it only made about .5 volts. To do work, it has to be pretty freakin big. It’s the weakness of the stirling concept. They don’t do torque.